Cisco CTX2500 Technical Information PDF herunterladen (Seite 13)

• VTMAP is the port to VT mapping type for that particular STS. Only supported on ONS 15454.

• INHFELPBK indicates whether far end loopbacks are inhibited on the facility. Only supported on

ONS 15454.

• AISONLPBK is the AIS to be sent on what type of loopback.

• CMDMDE is the command mode. Values are FRCD or NORM.

• AISVONAIS is enabled or disabled.

• AISONLOF is enabled or disabled.

• PST is primary state. Values are IS or OOS.

• SST is secondary state. Values are MT or AINS.

Input Example:

ED-T1:CISCO:FAC-2-1:1223:::LINECDE=AMI,FMT=ESF,LBO=0-131,TACC=8,

TAPTYPE=SINGLE,SOAK=10,SFBER=1E-4,SDBER=1E-6,SYNCMSG=Y,SENDDUS=Y,

RETIME=Y,NAME=“T1PORT”,MODE=FDL,SYNCMAP=ASYNC,ADMSSM=STU,

VTMAP=GR253,INHFELPBK=N,AISONLPBK=AIS_ON_LPBK_ALL,CMDMDE=CMDMDE,

AISVONAIS=Y,AISONLOF=Y:IS,AINS;

RTRV-T1

Use the RTRV-T1 command to retrieve configuration information on a DS1 port. RTRV-T1 is from

the Ports category.

Input Format:

RTRV-T1:[<TID>]:<AID>:<CTAG>[::::];

• TID is the name of the node you want to access. If you only want to query the node you connected

to leave the TID blank.

• AID is the access identifier to indicate slot and port.

• CTAG is any non-blank character series that does not have to be unique.

Input Example:

RTRV-T1:TID:FAC-2-1:1223;

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

Keine Kommentare

Cisco CTX2500 Technical Information Seite 13