Cisco 820 Series Bedienungsanleitung PDF herunterladen (Seite 5)

Configuration Note for the Cisco SOHO 76 and 77 Routers

OL-2479-02

Command Reference

Syntax Description

Default

None

Command Mode

This command is available in Privileged mode.

Command History

debug pppoe Command

The debug pppoe command provides information that is helpful for debugging PPPoE problems. The

syntax of this command is shown below. To disable the debugging output, use the no form of this

command.

debug pppoe [ data | errors | events | packets ]

no debug pppoe [ data | errors | events | packets ]

Syntax Description

Default

None.

Command Mode

This command is available in Privileged mode.

Usage Guidelines

The debug commands typically display a large number of debug messages. These should generally be

used only on a debug router with a single active session.

interface Clear PPPoE sessions on specified interface.

rmac Clear PPPoE sessions from specified client.

all Clear all PPPoE sessions.

Release Modification

Cisco IOS Release 12.2(4)YG This command was introduced on the Cisco SOHO 76, 77, and 77H

routers.

data Displays data packets of PPPoE sessions.

errors Displays PPPoE protocol errors that prevent a session from being

established, or displays errors that cause an established sessions to be

closed.

events Displays PPPoE protocol messages about events that are part of normal

session establishment or shutdown.

packets Displays each PPPoE protocol packet exchanged.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Keine Kommentare

Cisco 820 Series Bedienungsanleitung Seite 5