Cisco 7507 Bedienungsanleitung PDF herunterladen (Seite 14)

Step 5 Use a screwdriver to tighten the captive installation screw on the top of the power supply.

Note For DC-input power supplies, refer to the “Install the DC-Input Power Supply” section on page 13 to

complete this procedure.

Step 6 Push the cable retention clip away from the power supply receptacle, and push the power cable in

until the cable retention clip snaps into place.

Step 7 Connect the opposite end of the power cable to an appropriate power source.

Step 8 Repeat Step 1 through Step 7 to install the second power supply (optional).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Keine Kommentare

Cisco 7507 Bedienungsanleitung Seite 14