Cisco 7300-6T3 Spezifikationen PDF herunterladen (Seite 25)

CHAPTER

2-1

OC12 Packet Over SONET Line Card Installation and Configuration

OL-3437-01

Preparing for Installation

This chapter provides the general equipment, safety, and site preparation requirements for installing the

OC12 POS line card. This chapter contains the following sections:

• Required Tools and Equipment, page 2-1

• Software and Hardware Requirements, page 2-2

• Checking Hardware and Software Compatibility, page 2-2

• Safety Guidelines, page 2-2

• FCC Class A Compliance, page 2-6

Required Tools and Equipment

You need the following tools and parts to install a line card. If you need additional equipment, contact

a service representative for ordering information.

• OC12 POS line card (For information about the specific OC12 POS line card models, see the “Line

Card Overview” section on page 1-1.)

• SC-type single-mode optical fiber cables to connect the interfaces with the network (Single-mode

optical fiber cables for the OC12 POS line cards are not available from Cisco Systems but are

available from commercial cable vendors. For information about optical fiber cables, see the “OC12

POS Line Card Optical Fiber Specifications” section on page 1-5 and the “Cables and Connectors”

section on page 1-8.)

• Number 1 Phillips screwdriver

• Your own electrostatic discharge (ESD)-prevention equipment or the disposable grounding wrist

strap included with all upgrade kits, field-replaceable units (FRUs), and spares

• Antistatic mat and antistatic container

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 49 50

Keine Kommentare

Cisco 7300-6T3 Spezifikationen Seite 25