Cisco 7246 - uBR Router Bedienungsanleitung PDF herunterladen (Seite 60)

Command Reference

12.0(3)T

show interface cable

To display cable interface information, use the show interface cable privileged EXEC command.

show interface cable slot/port [downstream | upstream]

Syntax Description

Default

No default behavior or values.

Command Mode

Privileged EXEC

Command History

Sample Display

The following is sample output for the cable modem located in slot 6/port 0 from the show interface

cable command:

router# show interface cable 6/0

Cable6/0 is up, line protocol is up

Hardware is BCM3210 FPGA, address is 00e0.1e5f.7a60 (bia 00e0.1e5f.7a60)

Internet address is 1.1.1.3/24

MTU 1500 bytes, BW 27000 Kbit, DLY 1000 usec, rely 255/255, load 1/255

Encapsulation, loopback not set, keepalive not set

ARP type: ARPA, ARP Timeout 04:00:00

Last input 4d07h, output 00:00:00, output hang never

Last clearing of “show interface” counters never

Queueing strategy: fifo

Output queue 0/40, 0 drops; input queue 0/75, 0 drops

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

10908 packets input, 855000 bytes, 0 no buffer

Received 3699 broadcasts, 0 runts, 0 giants, 0 throttles

3 input errors, 3 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

5412 packets output, 646488 bytes, 0 underruns

0 output errors, 0 collisions, 13082 interface resets

0 output buffer failures, 0 output buffers swapped out

slot/port Identiﬁes the Cisco uBR7200 chassis slot number and

downstream port number. Valid values are from 3 to 6.

downstream (Optional) Displays cable downstream port information for a

cable modem.

upstream (Optional) Displays cable upstream port information for a

cable modem.

Release Modiﬁcation

11.3 XA This command was ﬁrst introduced.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 77 78

Keine Kommentare

Cisco 7246 - uBR Router Bedienungsanleitung Seite 60