Cisco 7202 Bedienungsanleitung PDF herunterladen (Seite 8)

8 280-Watt AC-Input Power Supply Replacement Instructions

Removing and Replacing the AC-Input Power Supply

To disconnect AC-input power to Cisco 7200 series routers, complete the following steps:

Step 1 Unplug the input power cable from the power source.

Step 2 Push down on the cable-retention clip that secures the input power cable to the router’s

power supply.

Step 3 Unplug the other end of the input power cable from the power supply. (See Figure 2.)

Figure 2 Disconnecting Power from a Cisco 7200 Series AC-Input Power Supply

This completes the procedure for disconnecting AC-input power.

Removing the AC-Input Power Supply

To remove the AC-input power supply from Cisco 7200 series routers, complete the following steps:

Step 1 Using a number 2 Phillips or a 3/16-inch, ﬂat-blade screwdriver loosen the two captive

screws on the faceplate of the power supply. (See Figure 3.)

H6744

NETWORK PROCESSING ENGINE-150

Internal fans

AC-input

power supply

AC-input

receptacle

Power switch

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Cisco 7202 Bedienungsanleitung Seite 8