Cisco 3800 Series Installationsanleitung PDF herunterladen (Seite 10)

Cisco 3800 Series Integrated Services Routers: Overview

OL-6339-01

Using the Cisco IOS Startup Sequence

Step 2 Create a user account with privilege level 15 (enable privileges, if necessary).

Router(config)#username <

username

> privilege 15 password 0 <

password

Replace <username> and <password> with the username and password of your choosing.

Step 3 Configure SSH and Telnet for local login and privilege level 15:

line vty 0 4

privilege level 15

transport input telnet

transport input telnet ssh

Step 4 (Optional) Enable local logging to support the log monitoring function:

Router(config)#logging buffered 51200 warning

To use SDM on a router that has been configured manually, see the “Starting SDM on a Manually

Configured Router” section on page 10.

Starting SDM on a Manually Configured Router

SDM is a web-based application that must be run from a PC that is connected to the router via a LAN.

If the router is configured as a DHCP server, the PC must be configured to receive an IP address

automatically. If the router is not configured as a DHCP server, you must configure the PC with a static

IP address on the same subnet as the router interface to which you are connecting the PC. For example,

if the router has the IP address 192.16.30.1, and the subnet mask is 255.255.255.248, you must configure

the PC to use a network address in the range from 192.16.30.2 through 192.16.30.6, and to use the same

subnet mask as the router.

Follow these steps to start SDM on a manually configured router:

Step 1 Open a web browser on the PC, and enter the IP address for the router.

https://

IP-address

The https://... specifies that the Secure Socket Layer (SSL) protocol will be used for a secure

connection. You can use http://... if SSL is not available.

Step 2 Enter the username and password that you specified in Step 2 of “Configuring the Router to Support

Web-Based Applications, a User with Privilege Level 15, and Telnet and SSH Protocols.”

To continue configuring your router, see the “Initial Configuration Using the Cisco Router and Security

Device Manager” section on page 3.

1 2 ... 5 6 7 8 9 10 11 12

Keine Kommentare

Cisco 3800 Series Installationsanleitung Seite 10