Cisco 3200 Series Bedienungsanleitung PDF herunterladen (Seite 10)

A-10

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Appendix A Connecting to the Cisco 3200 Series Router and Using the Command-Line Interface

Cisco 3200 WMIC Image Upload Procedure

To avoid conflicts, we recommend that you upload the same image to all of the devices (CPUs) in the

enclosure by configuring the router as a TFTP server that can serve the Cisco IOS image to the WMICs.

The following major steps are required to upload the Cisco IOS image to all the devices in a Cisco 3200

Series router stack.

Step 1 Configure the router as shown in the “Configuration Example for the MARC” section and verify

connectivity to a TFTP server.

Step 2 To copy the image to the MARC, use the copy tftp flash:tarfilename command.

Step 3 Enter the tftp-server flash:tarfilename command to configure the MARC as a TFTP server, making the

image available to the WMICs.

Step 4 Configure router for IP connectivity to all of the WMICs. Examples are provided in the “Fast Ethernet

0/0 WMIC Configuration Example Configuration” section on page A-11, the “Configuration Example

for the WMIC Attached to Switch Port 4” section on page A-11, and the “Configuration Example for the

WMIC Attached to Switch Port 3” section on page A-12.

Step 5 Upload the new image to the WMICs, for example:

–

Enter the archive download-software /overwrite tftp://20.20.20.1/c3202-k9w7-tar command

–

Enter the archive download-software /overwrite tftp://10.10.10.1/c3202-k9w7-tar command

–

Enter the archive download-software /overwrite tftp://10.10.10.2/c3202-k9w7-tar command

Step 6 To verify that the new image is in place, use the show version command.

Configuration Example for the MARC

hostname MAR

ip routing

interface FastEthernet0/0

ip address 20.20.20.1 255.255.255.0

interface FastEthernet2/0

no ip address

shutdown

interface FastEthernet2/1

no ip address

shutdown

interface FastEthernet2/2

no ip address

no shutdown

interface FastEthernet2/3

no ip address

no shutdown

interface Vlan1

ip address 10.10.10.1 255.255.255.0

1 2 ... 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco 3200 Series Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco 3200 Series