Cisco 3040 Installationsanleitung PDF herunterladen (Seite 64)

C-6

Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide

OL-10694-01

Appendix C Configuring the Switch with the CLI-Based Setup Program

Accessing the CLI Through the Console Port

Step 10 These choices appear:

[0] Go to the IOS command prompt without saving this config.

[1] Return back to the setup without saving this config.

[2] Save this configuration to nvram and exit.

If you want to save the configuration and use it the next time the switch reboots, save it

in NVRAM by selecting option 2.

Enter your selection [2]:2

Make your selection, and press Return.

Step 11 Disconnect the blade server serial port or the blade switch console port from the PC. See the

“Management Options” section on page 1-5 for information about managing the blade switch.

1 2 ... 59 60 61 62 63 64 65 66 67 68

Keine Kommentare

Cisco 3040 Installationsanleitung Seite 64