Cisco 2516 Bedienungsanleitung PDF herunterladen (Seite 20)

20 Release Notes for Cisco IOS Release 11.2(11) Software Feature Packs for Cisco 2500 Series Routers

Installing the Router Software Using a TFTP Server Application

Step 6 Enter the following commands to set the conﬁguration register to 0x2101 and reload to

the bootstrap image:

Router# config terminal

Router(config)# config-reg 0x2101

Router(config)# end

Router# reload

Note If you are upgrading a CiscoPro CPA2500 series router running from an image in

Flash memory, the router reloads to ROM monitor mode because of an interaction

between the Flash Load Helper and the cpa2500-upgrade-l.112-3.P image.

Step 7 Enter yes in response to the prompt asking if the system conﬁguration has been modiﬁed:

# System configuration has been modified. Save? yes

Step 8 If the password prompt appears, enter the password.

Password:

Step 9 At the router prompt, enter enable and then the password:

Router(boot)> enable

Password:

Step 10 If you are not upgrading a CiscoPro CPA2500 router, skip to Step 19.

Step 11 At the router prompt, enter the following command to copy the router upgrade utility

from the PC CD-ROM drive to the router:

Router(boot)# copy tftp flash

Note If you are using rcp, enter copy rcp ﬂash instead.

Step 12 When prompted, enter the IP address of your PC, as in the following example:

Address or name of remote host [255.255.255.255]? 131.108.1.1

This is the IP address of your local PC, not the router. (Note that you can obtain your PC

IP address from the DOS prompt in the windows directory by entering winipcfg, as

follows: C:\WINDOWS> winipcfg.)

Step 13 When prompted, enter the ﬁlename of the image to be copied to the router as in the

following example:

Source file name? cpa2500-upgrade-l.112-3.P

Note The upgrade image ﬁle on the Feature Pack CD has a long ﬁlename

(cpa2500-upgrade-l.112-3.P); note that DOS displays it in 8.3 format as cpa2500~1.P.

The upgrade utility is a special ﬁle, not a Cisco IOS runtime image.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

Keine Kommentare

Cisco 2516 Bedienungsanleitung Seite 20