Cisco 2514 - Router - EN Bedienungsanleitung PDF herunterladen (Seite 4)

CONFIGURATION OF PCS AND ROUTERS - PAGE 4

8 GB. Set the mount point of this partition to root directory “/”. This partition will be

used for installing Redhat9.0

• We recommend to create another partition of type “swap”. The size of this partition

should be twice the size of the RAM. For example, if the PC has 256 MB of RAM,

the size of the “swap” partition should be 512 MB.

• Delete partitions that are not needed.

• Press "OK" if the partitioning is finished.

Step 4: Configuring Boot Loader.

• Select the Boot Loader. In the Boot Loader Configuration dialog box, select "Use

GRUB Boot Loader" (recommended) or “Use LILO Boot Loader”.

• Don’t type boot options.

• Unselect “Use a GRUB Password” in the boot loader configuration process.

• In the Boot Loader Configuration dialog box, change the Boot Label to “RedHat

9.0”. Press "OK".

• Choose the place where the Boot Loader is running

. In the Boot Loader

Configuration dialog box, select "Master Boot Record (MBR)".

Step 5: Network Configuration.

• Configure network. In the Network Configuration dialog box for eth0 and eth1,

unselect "Use bootp/dhcp”. For eth0 select “Activate on boot”, and for eth1 do not

select “Activate on boot”. Set the hostname to “PC1”, “PC2”, “PC3”, or “PC4 , and

the IP addresses and netmasks as given in the following table.

Leave the entries

for default gateway, primary nameserver, secondary nameserver and ternary

nameserver blank. Press "OK".

Hostname

Interface eth0 Interface eth1

PC1

IP address 10.0.1.11

Netmask 255.255.255.0

IP address 10.0.2.11

Netmask 255.255.255.0

PC2

IP address 10.0.1.12

Netmask 255.255.255.0

IP address 10.0.2.12

Netmask 255.255.255.0

PC3

IP address 10.0.1.13

Netmask 255.255.255.0

IP address 10.0.2.13

Netmask 255.255.255.0

PC4

IP address 10.0.1.14 IP address 10.0.2.14

The hostname and IP addresses are reset by a script from the Internet Lab configuration software. However, the

installation procedure requires that you type an IP address.

1 2 3 4 5 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco 2514 - Router - EN Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco 2514 - Router - EN