Cisco 1905/K9 Bedienungsanleitung PDF herunterladen (Seite 2)

Specification

1. AC power supply 100V-240V AC, 50/60Hz

2. CPU: ARM11, 32-bit RISC @667MHz

3. Network device : (Auto-Negotiation)

(1) Console : 10/100 Mb Ethernet (802.3) 1 Port

(2) Port 1~4 : 4-port Switch Hub

4. Embedded multi-tasking operating system

5. IPv4/IPv6 protocol stack

6. Configuration parameters setting through web browser

7. Customized graphical user interface(GUI)

(1) Offer different type of IPv4 and IPv6 header to allow user

to freely modify and send packet.

(2) Offer Windows OS IPv6 command list.

(3) Offer IPv6 experiment list and relevant data.

8. Enable Remote Packet CAPture service (RPCAP) and

use Wireshark software to observe network packets.

：

K&H reserves the right to make changes without notice

10301

ITS-200 series

K&H MFG. CO., LTD.

5F., No. 8, Sec. 4, Ziqiang Rd., Sanchong Dist, New

Taipei City 241, Taiwan (R.O.C.)

http: //www.kandh.com.tw

T e l : 886-2-2286-0700 (Rep.) 886-2-2286-7786

Fax : 886-2-2287-3066, 886-2-2287-9704

E-Mail: [email protected]

Platform

}

AC power supply 100V~240V AC, 47~63Hz

Embedded IP Security / Secure Sockets Layer (IPSec / SSL) VPN

hardware acceleration

Integrated Gigabit Ethernet ports : 10/100/1000 Gigabit Ethernet

WAN-routed ports

Integrated serial port (HWIC-1T) : for serial WAN connectivity

Innovative universal-serial-bus (USB) based console access :

mini-Type B USB console port supports management connectivity

IPv4/IPv6 Dual Stack

IPv6 Transition –Tunnel Mode (Cisco 1905-SEC/K9)

IPv6 Transition –Translator Mode

Protocols : IPv4, IPv6, static routes, Open Shortest Path First (OSPF),

Border Gateway Protocol (BGP)…etc.

Encapsulations : Ethernet, 802.1q VLAN, Point-to-Point Protocol

(PPP), Point-to-Point Protocol over Ethernet (PPPoE), and ATM.

Traffic Management：QoS, Class-Based Weighted Fair Queuing

(CBWFQ), Policy-Based Routing (PBR), Performance Routing

(PfR), and Network-Based Advanced Routing (NBAR).

List of Experiments

}

Exp. 1 : ITS-201 brief introduction

Unit 1 : ITS-201 hardware

Unit 2 : ITS-201 software

Exp. 2 : Cisco 1905 router brief introduction

Unit 1 : Configuration

Unit 2 : IPv6 Command list

Exp. 3 : IPv6 Header

Unit 1 : send IPv4 packet and the mechanism of RPCAP

Unit 2 : send IPv6 packet and observe the IPv6 header

Exp. 4 : IPv6 Extension Header

Unit 1 : Next Header is Hop-by-Hop Options Header

Unit 2 : Next Header is Fragment Header

Unit 3 : Next Header is TCP Header (HTTP)

Unit 4 : Next Header is UDP Header (DNS)

Exp. 5 : IPv6 Addressing

Unit 1 : Stateful DHCPv6(Dibbler Server/Client)

Unit 2 : Stateless DHCPv6(Dibbler Server/Client)

Unit 3 : Windows command-ipconfig/release6

Unit 4 : Windows command-ipconfig/ renew6

Exp. 6 : DHCPv6

Unit 1 : Stateful DHCPv6(Cisco 1905)

Unit 2 : Stateless DHCPv6(Cisco 1905)

Unit 3 : Stateless Autoconfiguration(Cisco 1905)

Exp. 7 : ICMPv6 – Error Messages

Unit 1 : Destination Unreachable

Unit 2 : Packet Too Big

Unit 3 : Time Exceeded

Unit 4 : Parameter Problem

Exp. 8 : ICMPv6 – Information Messages

Unit 1 : Ping IPv4 address and ARP command

Unit 2 : Ping IPv6 link-local address and NetSH command

Unit 3 : Ping IPv6 global unicast address

Exp. 9 : Neighbor Discovery

Unit 1 : Link-Layer Address Resolution

Unit 2 : Duplicate Address Detection

Unit 3 : Router Discovery

Exp. 10 : IPv6 Transition

Unit 1 : Dual Stack

Unit 2 : Tunnel (6to4,require Cisco 1905-SEC/K9 at option)

Unit 3 : Translator (NAT-PT)

Exp. 11 : IPv6 Gateway and Route

Unit 1 : IPv4 Gateway

Unit 2 : IPv6 Gateway

Unit 3 : Static Route

ITS-201

}

Cisco Router

Standard : Cisco 1905/K9,

Option : Cisco 1905-SEC/K9)

(

}

USB or RJ-45 cable

RJ-45 cable

ITS-201

Host

Switch

Hub

ITS-201

Host

Switch

Hub

ITS-201

Host

Switch

Hub

Web based config

ITS-201

and

Browse remote packet

Cisco 1905

1 2

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco 1905/K9 Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco 1905/K9