Cisco 1600R Installationsanleitung PDF herunterladen (Seite 54)

Cisco 1600 Series Router Hardware Installation Guide

Problem Solving

A-6

— Make sure that the Flash PC card is correctly installed in the router. For more

information on installing the card, refer to the “Installing a Flash PC Card” section

in the “Optional Installations” chapter.

• Router boots, but the console screen is frozen.

— Check the external console connection and make sure it is secure.

— Verify that the parameters for your terminal are set to the following:

9600 baud

8 data bits

No parity generated or checked

1 stop bit

• Router powers on and boots only when a particular WAN interface card is removed from

the router.

— Replace the card. Consult your reseller or local Cisco sales ofﬁce for warranty

information.

— If you are using a Cisco 1603 or Cisco 1604, check that the router does not have a

ISDN S/T or an ISDN U card installed.

• Router powers on and boots only when a particular cable is disconnected.

— There might be a problem with the WAN interface card or card cables. Consult your

reseller or local Cisco sales ofﬁce for warranty information.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 87 88

Keine Kommentare

Cisco 1600R Installationsanleitung Seite 54