68-pin Cisco
2509-2512;
network
modules on
the Cisco
2600 and
3600.
Cisco parts
CAB-OCTAL-ASYNC(=)
(with connectors marked
"MODEM") and
CAB-OCTAL-MODEM(=).
"Smart
Serial"
WAN
interface
card (WIC)
on 1720 and
2600s.
Cisco part
CAB-SS-232MT(=).
Note 1: Sync/async interfaces require the physical-layer async configuration command in order to operate
in asynchronous mode.
Note 2: The Cisco 1005 requires the IP/ASYNC or the IP/IPX/ASYNC feature set of Cisco IOS Software
in order to allow asynchronous mode on its Serial interface.
Console Port Issues
There are several advantages to connecting a modem to the console port of a router instead of the AUX
port; however, the disadvantages are significant.
Advantages of connecting a modem on the console port:
Passwords can be recovered remotely. You may still need someone on-site with the router to toggle
the power, but aside from that, it's identical to being there with the router.
●
It is a convenient method of attaching a second modem to a router without async ports. This is
beneficial if you need to access the router for configuration or management while leaving the AUX
port free for dial-on-demand routing (DDR).
●
Some routers (for example, Cisco 1600s) do not have AUX ports. If you want to connect a modem to
the router and leave the serial port(s) free for other connections, the console is the only option.
●
Disadvantages of connecting a modem on the console port:
The console port does not support RS232 modem control (data set ready/Data Carrier Detect
(DSR/DCD), data terminal ready (DTR)). Therefore, when the EXEC session terminates (logout), the
modem connection will not drop automatically; the user will need to manually disconnect the session.
●
More seriously, if the modem connection should drop, the EXEC session will not automatically reset.
This can present a security hole, in that a subsequent call into that modem will be able to access the
console without entering a password. The hole can be made smaller by setting a tight exec-timeout
on the line. However, if security is important, it is recommended to use a modem that can provide a
password prompt.
●
Unlike other async lines, the console port does not support hardware (Clear to Send/Ready to Send
(CTS/RTS) flow control. It is recommended to use no flow control. If data overruns are encountered,
however, software (XON/XOFF) flow control may be enabled.
●
The console ports on most systems only support speeds of up to 9600 bps.●
The console port lacks reverse telnet capability. If the modem loses its stored initialization string, the
only remedy is to physically disconnect the modem from the router and attach it to another device
●
(30 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern