Cisco MDS 9020 - Fabric Switch Spezifikationen PDF herunterladen (Seite 60)

Send documentation comments to mdsfeedbac[email protected].

B-2

Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide

OL-7765-02

Appendix B Configuring Static Domain IDs and Persistent FC IDs

In the following procedure, the existing VSAN has a switch C-186 with a domain ID of 209. In Fabric

Manager, the VSAN is statically configured and a persistent FC ID is enabled. This procedure does not

alter the running domain ID.

To configure a static domain ID for an existing VSAN and enable a persistent FC ID for the same VSAN

using Fabric Manager, follow these steps:

Step 1 In the Logical Domains pane, expand the VSAN to be modified and then choose Domain Manager. See

Figure B-1.

Step 2 Click the Configuration tab.

Step 3 Enter the domain ID that is in the Running DomainID (in Figure B-1, it is 209) field in the Config

Domain Id field.

Step 4 Change the Config Domain IdType field to static.

Step 5 Click the green Apply Changes... icon .

Figure B-1 Enabling Static Domain ID

Step 6

Click the Persistent Setup tab.

Step 7 Check the Enable check box.

Step 8 Click Apply Changes.

At this point, the domain ID has been statically set and FC IDs will remain persistent across reboots for

VSAN 3000 on the switch C-186. The persistent FC ID database can be viewed in the Persistent Fcids

tab.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 69 70

Keine Kommentare

Cisco MDS 9020 - Fabric Switch Spezifikationen Seite 60