Cisco XR 12000 Series Bedienungsanleitung PDF herunterladen (Seite 35)

2-5

Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide

OL-17438-04

Chapter 2 Overview: Cisco XR 12000 Series Router Shared Port Adapters

2-Port and 4-Port T3/E3 Serial SPA Overview

The following sections describe the 2-Port and 4-Port Clear Channel T3/E3 SPA:

• 2-Port and 4-Port Clear Channel T3/E3 SPA LEDs, page 2-5

• 2-Port and 4-Port Clear Channel T3/E3 SPA Interface Specifications, page 2-6

• 2-Port and 4-Port Clear Channel T3/E3 SPA Cables and Connectors, page 2-6

2-Port and 4-Port Clear Channel T3/E3 SPA LEDs

The 2-Port and 4-Port Clear Channel T3/E3 SPA has three types of LEDs: two LEDs for each port on

the SPA, and one STATUS LED, as shown in

Figure 2-1.

Figure 2-1 4-Port Clear Channel T3/E3 SPA Faceplate

Table 2-3 describes the 2-Port and 4-Port Clear Channel T3/E3 SPA LEDs.

1-Port 10-Gigabit Ethernet DWDM SPA 10 Gbps 1 10 Gbps

1-Port 10-Gigabit Ethernet WAN PHY SPA 10 Gbps 1 10 Gbps

1. Total bandwidth value assumes eight OC-12/STM-4 optics modules.

Table 2-2 SPA Bandwidth Capacity (continued)

SPA Per-Port Bandwidth

Number

of Ports Total Bandwidth

1 C/A (Carrier/Alarm) LED 4 RX (Receive) connector

2 A/L (Active Loopback) LED 5 STATUS LED

3 TX (Transmit) connector

C/A

STATUS

SPA-4XT3/E3

A/L

C/A

A/L

C/A

A/L

C/A

A/L

3 4 5

116851

Ta bl e 2-3 2-Port and 4-Port Clear Channel T3/E3 SPA LEDs

LED Label Color State Meaning

C/A Off Off Port is not enabled by software.

Green On Port is enabled by software, and there is a valid E3 or T3

signal without any alarms.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 147 148

Keine Kommentare

Cisco XR 12000 Series Bedienungsanleitung Seite 35