
A-10
Cisco AS5400XM Universal Gateway Chassis Installation Guide
OL-6418-02
Appendix A Replacing Memory Components
Replacing the Chassis Cover
Chassis Cover Replacement
To replace the chassis cover, follow these steps:
Step 1 Place the chassis bottom so that the front panel is facing you.
Step 2 Hold the chassis cover over the chassis bottom, and align each of the cover tabs with the chassis tabs at
the top rear of the chassis, as shown in
Figure A-7.
Figure A-7 Replacing the Chassis Cover
Step 3 Lower the front of the top cover to close the chassis, and ensure the following:
• The chassis cover tabs fit under the edge of the chassis rear panel so that they are not exposed.
• The chassis tabs fit under the chassis cover so that they are not exposed. (See Figure A-8.)
Figure A-8 Cisco AS5400XM Chassis
Step 4 Secure the chassis cover with four screws.
Step 5 Reinstall the chassis on a rack, desktop, or table.
30853
Chassis bottom
Front panel
Chassis
tabs
Cover
Cover
tabs
4
29023
Kommentare zu diesen Handbüchern