Cisco WRTP54G Bedienungsanleitung PDF herunterladen (Seite 20)

Wireless-G Broadband Router with 2 Phone Ports

Chapter 4: Connecting the Router

Placement Options

Wall-Mount Option

The Router has four wall-mount slots on its bottom panel. The distance between two adjacent slots is

62 mm (2.44 inches).

Before you begin, make sure you have four screws that are size #4—this indicates a diameter measurement of

0.112 inches (2.845 mm).

1. Determine where you want to mount the Router.

2. Drill four holes into the wall. Make sure adjacent holes are 62 mm (2.44 inches) apart.

3. Insert a screw into each hole, and leave 5 mm (0.2 inches) of its head exposed.

4. Maneuver the Router so the wall-mount slots line up with the four screws.

5. Place the wall-mount slots over the screws and slide the Router down until the screws fit snugly into the

wall-mount slots.

Proceed to “Chapter 5: Configuring the Router.”

62 mm

(2.44 inches)

Figure 4-6: Measurement between

Wall-Mount Slots

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 113 114

Keine Kommentare

Cisco WRTP54G Bedienungsanleitung Seite 20