Cisco BTS 10200 Installationsanleitung PDF herunterladen (Seite 2)

CISCO CONFIDENTIAL

Cisco BTS 10200 Softswitch — Release Notes for Release 3.3 V04

OL-1835-04

System Requirements

The Cisco BTS 10200 Softswitch consists of the following equipment:

• Call Agent/Feature Server (CA/FS)—Two application servers, each with four CPUs.

Continuous Computing Corp. Model AXmp: 4 CPUs, 4 GBytes RAM, 4 Disks (36 GBytes each)

• Element Management System (EMS)/Bulk Data Management System (BDMS) servers—

Two administration processors, each with one CPU.

Continuous Computing Corp. Model AXi: 2 CPUs, 2 GBytes RAM, 4 Disks (36 GBytes each)

• Two Cisco 2924M switch routers.

• Continuous Computing Corp. Intelligent Alarm Panel (IAP)

• Power distribution unit (PDU) for DC systems.

DC-powered systems require two (redundant) feeds of 40A at -48 VDC. AC-powered systems

require two (redundant) circuits of 20A at 120 VAC.

The physical requirements for installation of the Cisco BTS 10200 Softswitch are documented in the

Cisco BTS 10200 Softswitch Building Environment and Power Site Survey.

For more detailed information, refer to the Cisco BTS 10200 Softswitch System Description.

Operator Access

Operator access to the Cisco BTS 10200 Softswitch is available only by secure shell (SSH) session

to the EMS over Ethernet. Communications can be interactive or can be in batch mode using FTP.

Installation Notes

For detailed installation procedures for the Release 3.3 V04 software, refer to the Cisco BTS 10200

Softswitch Application Installation Guide.

Limitations and Restrictions

The Release 3.3 V04 software requires that the measurement-prov command use the type token

“announce” rather than “anm” as it is for all other CLI commands. Entering “type=anm” for the

measurement-prov command returns an error message.

Provisioning Cisco BTS 10200 the Generate EMs or CDBs

Provision the Cisco BTS 10200 to generate either EMs or CDBs, but not both. Attempting to generate

both types of records simultaneously can significantly degrade the call processing rate. Refer to the

"Event Message Billing Support" section for provisioning details.

1 2 3 4 5 6 7 ... 59 60

Keine Kommentare

Cisco BTS 10200 Installationsanleitung Seite 2