Cisco Prisma II Hybrid Amplifier Spezifikationen PDF herunterladen (Seite 172)

2-34 Receivers 4000326 Rev A

Monitor Status Parameters,

Continued

STATUS Screen Description

The first STATUS screen is called the Summary STATUS screen, and it provides the

following receiver information:

• Received optical power level in dBm for RX 1 and RX 2

• SMC ID of the receiver

When in the summary STATUS screen, press the Select key on the receiver to

rotate through the remaining parameters.

Each parameter has its own STATUS screen that displays the following information:

• The parameter being monitored

• The measured level of the parameter being monitored

• A FAIL indication for parameters without an operating range that are not working

• Assessment of the measured level, against the level required for normal operation,

for items without an operating range

The following table shows the assessments that can be displayed for each measured

item.

STATUS Screen Value Description

The measured level is within the range for normal

operation.

HIGH

The measured level is above the range for normal

operation.

LOW

The measured level is below the range for normal

operation.

FAIL

Component, test, or signal failure (for parameters

without an operating range).

Continued on next page

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 339 340

Keine Kommentare

Cisco Prisma II Hybrid Amplifier Spezifikationen Seite 172