Cisco Aironet 340 Series Installationsanleitung Seite 40
- Seite / 70
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
3-8
Cisco Aironet Access Point Hardware Installation Guide
OL-0738-02
Chapter 3 Basic Configuration
Entering Basic Settings
Figure 3-2 Connecting the Serial Cable for 350 Series Metal Case Access Points
Step 2
Open a terminal emulator.
Step 3 Enter these settings for the connection:
• Bits per second (baud rate): 9600
• Data bits: 8
• Parity: No parity
• Stop bits: 1
• Flow control: Xon/Xoff
Step 4 Press = to display the home page of the access point. If the access point is new and its factory
configuration has not been changed, the Express Setup page appears; if the access point has been
configured, the Summary Status page appears.
Step 5 Press n to select System Name. Type a system name for the access point and press Enter. A descriptive
system name makes it easy to identify the access point on your network.
Step 6 Press t and then press Enter to select Terminal Type. Press t and then press Enter to select teletype
display on the console interface. Press a and then press Enter to select ANSI display on the console
interface.
Step 7 Press pr and then press Enter to select Config Server Protocol. Press n to select none; press b to select
BOOTP; press d to select DHCP. Press Enter after you make your selection.
Step 8 Press ad and then press Enter to select IP Address. Enter an IP address for the access point. If DHCP is
not enabled for your network, the IP address you enter is the access point’s static IP address. If DHCP
is enabled, the address you enter provides the IP address only when no DHCP server responds with an
IP address for the access point.
Step 9 Press su and then press Enter to select IP Subnet Mask. Enter an IP subnet mask to identify the
subnetwork so the access point’s IP address can be recognized on the LAN. If DHCP is not enabled, the
subnet you enter is the static subnet mask. If DHCP is enabled, your entry provides the subnet mask only
when no DHCP server responds to the access point’s DHCP request.
Step 10 Press g and then press Enter to select Default Gateway. Enter the IP address of your default internet
gateway. The entry 255.255.255.255 indicates no gateway.
Step 11 Press ra and then press Enter to select Radio Service Set ID (SSID). Enter an SSID for the access point.
The SSID is a unique identifier that client devices use to associate with the access point. The SSID can
be any alphanumeric entry from two to 32 characters long.
C
I
S
C
O
A
I
R
O
N
E
T
3
5
0
S
E
R
I
E
S
W
IR
E
LES
S
A
CC
ES
S P
O
IN
T
E
T
H
E
R
N
E
T
A
C
T
IV
IT
Y
A
S
S
O
C
I
A
T
I
O
N
S
T
A
T
U
S
R
A
D
I
O
A
C
T
I
V
I
T
Y
SERIAL PORT
ONLINE POWER ETHERNET
LEFT
RIGHT/PRIMARY
SERIAL PORT
5VDC
9-pin serial extension
cable to PC COM port
RS-232
- Cisco Aironet Access Point 1
- Hardware Installation Guide 1
- CONTENTS 3
- 3 Basic Configuration 3-1 4
- 4 Troubleshooting 4-1 4
- Contents 5
- Objectives 7
- Audience 7
- Organization 7
- Conventions 8
- Related Publications 8
- Obtaining Documentation 9
- Documentation Feedback 9
- Cisco TAC Website 10
- Opening a TAC Case 10
- TAC Case Priority Definitions 10
- OL-0738-02 11
- Overview 13
- Key Features 14
- Metal Enclosure 15
- Ethernet and Serial Ports 15
- Indicators 16
- Root Unit on a Wired LAN 17
- Access Point 18
- (Root Unit) 18
- (Repeater) 18
- Wired LAN 18
- Access Point Specifications 20
- Chapter 1 Overview 21
- Installation 23
- Cautions and Warnings 24
- Installation Guidelines 25
- Wired LAN 1 26
- Wired LAN 2 26
- Unpacking the Access Point 28
- Chapter 2 Installation 29
- Option 1 Option 2 Option 3 30
- Basic Configuration 33
- Before You Start 34
- Using the IP Setup Utility 34
- Obtaining and Installing IPSU 35
- Entering Basic Settings 37
- Using a Terminal Emulator 39
- 9-pin serial extension 40
- Default Basic Settings 42
- Troubleshooting 43
- Ethernet 44
- Checking Basic Settings 45
- Translated Safety Warnings 51
- Lightning Activity Warning 53
- Installation Warning 53
- Circuit Breaker (15A) Warning 54
- Power Injector Warning 56
- ¡Advertencia! 57
- Varning! 57
- Information 59
- Tested To Comply 60
- With FCC Standards 60
- FOR HOME OR OFFICE USE 60
- Canadian Compliance Statement 61
- Liechtenstein 62
- Bridges in Japan 64
Verwandte Produkte und Handbücher für WLAN-Zugangspunkte Cisco Aironet 340 Series
(10 Seiten)
(41 Seiten)
(2 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.880 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern