Cisco PIX-515E Installationsanleitung PDF herunterladen (Seite 7)

4-7

Cisco PIX Firewall Hardware Installation Guide

78-13880-01

Chapter 4 PIX 515/515E

PIX 515/515E Feature Licenses

Figure 4-9 Two Single-Port Ethernet Connectors in a PIX 515/515E

Note As shown in Figure 4-9, if your unit has one or two single-port Ethernet circuit

boards installed in the auxiliary assembly on the left of the unit at the rear, the

circuit boards are numbered top to bottom so that the top circuit board is Ethernet

2 and the bottom circuit board is Ethernet 3. (Additional Ethernet circuit boards

require the PIX-515/PIX 515E-UR license to be accessed.)

If you have a second PIX Firewall to use as a failover unit, install the failover feature and cable as

described in “Installing Failover”.

Note Do not power on the failover units until the active unit has been configured.

Step 4 Power on the unit from the switch at the rear to start the PIX 515/515E.

PIX 515/515E Feature Licenses

If you have a PIX-515/515E-UR unrestricted feature license, the following options are available:

• If you have a second PIX 515/515E to use as a failover unit, install the failover feature and cable

as described in “Installing Failover”.

• If needed, install the PIX Firewall Syslog Server as described in the logging command page in the

Cisco PIX Firewall Command Reference, Version 6.1.

• Refer to “Removing and Replacing a PIX 515/515E Chassis Cover”, for information about how to

remove and replace the chassis cover if you need to install optional circuit boards.

Note It is very important to remove the chassis cover before installing circuit boards in the

PIX 515/515E. Even though it may appear possible to add or remove circuit boards from

the back panel, removing the chassis cover greatly simplifies the process.

• If you need to install additional memory, refer to, “Installing a Memory Upgrade”.

DO NOT INSTALL INTERFACE

CARDS WITH POWER APPLIED

CONSOLE10/100 ETHERNET 0

Link

FDX

100 Mbps

Link

100 Mbps

FAILOVER

10/100 ETHERNET 1

PIX-515

25734

Ethernet 3

Ethernet 2

Ethernet 1

Ethernet 0

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco PIX-515E Installationsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco PIX-515E