Cisco UCS-MR-1X082RY-A= Datenblatt PDF herunterladen (Seite 18)

Cisco UCS C240 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)

CONFIGURING the SERVER

STEP 4 SELECT RAID CONFIGURATION

The RAID controller choices are:

■ Embedded RAID (on motherboard)

■ Mezzanine RAID controller cards

■ Plug-in PCIe RAID controller cards

Cisco can provide factory-configured RAID systems depending on the RAID controller chosen and

the number of drives ordered. Factory-configured RAID options are listed with each RAID card

description.

Select RAID Options

Select as follows:

■ One embedded RAID upgrade option (see Table 5), or

■ One mezzanine RAID controller (see Table 6), or

■ One PCIe RAID controller card (see Table 7 on page 19)

NOTE: If you do not select a mezzanine card, a plug-in PCIe RAID card, or one of the

embedded RAID upgrade options, you will have an embedded SATA-only RAID

controller that supports up to four SATA-only drives (RAID 0, 1, 10)

NOTE: The number of RAID groups (logical drives/virtual drives) supported per

controller is as follows:

■ Embedded RAID = 8 drives

■ Cisco UCSC RAID SAS 2008M-8i Mezzanine Card = 16 drives

■ LSI MegaRAID SAS 9266-8i/9266CV-8i RAID controller cards = 64 drives

Table 5 Available Embedded RAID Options

Product ID (PID) PID Description

RAID Controllers

UCSC-RAID-ROM5 Onboard RAID, supporting up to 8 SAS or SATA drives. SAS and SATA drives can

be mixed. This option supports RAID 0, 1, and 10, and operates at 3 Gb/s.

Operating systems supported are Windows and Linux only (no VMware

support).

UCSC-RAID-ROM55 Onboard RAID, supporting up to 8 SAS or SATA drives. SAS and SATA drives can

be mixed. This option supports RAID 0, 1, 10, and 5, and operates at 3 Gb/s.

Operating systems supported are Windows and Linux only (no VMware

support).

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 65 66

Keine Kommentare

Cisco UCS-MR-1X082RY-A= Datenblatt Seite 18