Cisco 3200 Series Bedienungsanleitung PDF herunterladen (Seite 15)

1-9

Cisco 3200 Series Router Hardware Upgrade Guide

OL-15983-01

Chapter 1 Introduction

What You Can Upgrade or Replace

For more information about the difference between the two versions of the wiring card, see Field Notice:

FN - 62845 at:

www.cisco.com/en/US/products/hw/routers/ps272/products_field_notice09186a00808fbc72.shtml

What You Can Upgrade or Replace

This guide describes how to upgrade or replace the following Cisco 3200 Rugged ISR components in

the field:

• WMICs

• Cisco 3230 and 3270 MARCs

• SMICs

• FESMICs

• MRPCs

• SFP Modules

Required Tools

Before you start the process of upgrading or replacing Cisco 3230 Rugged Enclosure and Cisco 3270

Rugged Enclosure components, make sure you have the following tools available.

Tool Description

Straight slot screwdriver Use this tool to adjust the spacing on the stack.

Phillips screwdriver Use this tool to tighten the screws holding the wiring card.

Hex blades/bits (3/3-in.)

with adjustable torque

driver (2.5 to 6 in-lb)

Use this tool to loosen the screws holding the stack cards. This tool is also

referred to as an Allen wrench.

Adjustable wrench Use this tool to change out the radio connectors on the back of the

enclosure.

Socket wrench (3/8-in.) Use this tool to tighten the end caps.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 59 60

Keine Kommentare

Cisco 3200 Series Bedienungsanleitung Seite 15